Cable de Prueba de Lanzamiento Monomodo EXFO SPSB-B-150-88-88
EXFO SPSB-B-150-88-88 Singlemode Launch Test Cable
Solicitar presupuesto
EXFO SPSB-B-150-88-88 es un cable de prueba de lanzamiento monomodo de 150m con conectores duales SC/APC para cobertura de zona muerta OTDR y caracterización de fibra.
Detalles del producto
| Modelo | SPSB-B-150-88-88 |
| Fabricante | EXFO |
| Categoría | Prueba de Redes y Fibra Óptica |
| Disponibilidad | Bajo pedido |
Description
Descripción General
El EXFO SPSB-B-150-88-88 es un cable de prueba de lanzamiento portátil utilizado con reflectómetros ópticos en el dominio del tiempo (OTDR) para caracterización y comisión precisa de fibra. Este cable monomodo de 150m cubre la zona muerta del OTDR, permitiendo medición precisa de pérdida en conexiones de fibra que de otro modo serían no medibles.
Características Principales
- Fibra monomodo de 150m (9/125 µm)
- Conectores SC/APC en ambos extremos
- Pérdida de inserción del conector menor a 0.5 dB
- Reflectancia del conector menor a −60 dB (APC)
- Diseño portátil en bolsa de transporte suave
- Permite medición de pérdida en conexiones de fibra primera y última
- Reduce el número de emparejamientos de conectores OTDR para extender la vida útil del equipo
- Longitud ideal para zonas muertas OTDR estándar
Aplicaciones
- Caracterización de fibra OTDR y comisión de redes
- Instalación y resolución de problemas de enlaces de fibra
- Medición de pérdida en conexiones de fibra críticas
- Pruebas de aseguramiento de calidad de redes y enlaces de fibra
Especificaciones técnicas
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-150 | Soft pulse suppressor bag, singlemode fiber 9/125, 150 m |
| 88 | SC/APC narrow key |
Solicitar presupuesto
Cable de Prueba de Lanzamiento Monomodo EXFO SPSB-B-150-88-88
Respuesta en 24 horas
Sin compromiso
Comunicación directa