Cable de Prueba de Lanzamiento EXFO SPSB-B-150-98-88
EXFO SPSB-B-150-98-88 Launch Test Cable
Solicitar presupuesto
EXFO SPSB-B-150-98-88 es un cable de prueba de lanzamiento monomodo de 150 m para pruebas OTDR de fibra, permitiendo medición de pérdida en las conexiones de fibra primera y última.
Detalles del producto
| Modelo | SPSB-B-150-98-88 |
| Fabricante | EXFO |
| Categoría | Prueba de Redes y Fibra Óptica |
| Disponibilidad | Bajo pedido |
Description
Descripción General
El EXFO SPSB-B-150-98-88 es una caja supresora de pulsos portátil suave de 150 metros para pruebas OTDR (Reflectómetro Óptico en el Dominio del Tiempo). Permite medición precisa de pérdida en puntos de conexión de fibra al cerrar la zona muerta del OTDR, que es esencial para caracterización precisa de enlaces de fibra y verificación de instalación.
Características Principales
- Fibra monomodo de 150 m (9/125 µm) extiende el rango de medición OTDR más allá de la zona muerta
- Conectores SC/APC para compatibilidad con la mayoría de puertos OTDR y panel de parcheo
- Pérdida de inserción del conector < 0.5 dB para degradación mínima de señal
- Reflectancia del conector APC < –60 dB para mediciones precisas de backscatter
- Bolsa de transporte suave portátil para despliegue en campo
- Reduce el desgaste del conector OTDR eliminando emparejamiento directo
Aplicaciones
- Caracterización de enlaces de fibra óptica y medición de pérdida
- Pruebas de aceptación de instalación para redes de fibra
- Resolución de problemas y mantenimiento de cables
- Medición de pérdida de conexión primera y última en tramos de fibra
Especificaciones técnicas
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-150 | Soft pulse suppressor bag, singlemode fiber 9/125, 150 m |
| 88 | SC/APC narrow key |
| 98 | LC/PC |
Solicitar presupuesto
Cable de Prueba de Lanzamiento EXFO SPSB-B-150-98-88
Respuesta en 24 horas
Sin compromiso
Comunicación directa