Farnell AP60-150 Fuente de Alimentación Autoajustable
Farnell AP60-150 Autoranging Power Supply
El Farnell AP60-150 es una fuente de alimentación CC autoajustable de 3kW que entrega 0-60V/0-150A con modos de voltaje o corriente constante, interfaz GPIB y detección remota.
Detalles del producto
| Modelo | AP60-150 |
| Fabricante | Farnell |
| Categoría | Fuentes de Energía y Cargas Electrónicas |
| Disponibilidad | Bajo pedido |
Description
Descripción General
El Farnell AP60-150 es una fuente de alimentación CC autoajustable de 3kW capaz de entregar 0-60V a 0-150A dentro de una envolvente de potencia constante. Utilizando topología de modo conmutado eficiente, proporciona combinaciones flexibles de voltaje y corriente adecuadas tanto para uso de banco como para integración de sistemas. La unidad presenta modos de operación de voltaje constante (CV) o corriente constante (CI) con capacidades de programación y lectura de alta precisión.
Características Clave
- Salida de Potencia de 3kW: Rango de 0-60V/0-150A con combinaciones de voltaje/corriente autoajustables
- Operación de Voltaje Constante o Corriente Constante: Limitación automática a valores preestablecidos
- Interfaz IEEE 488.2 GPIB: Control manual o de bus con programación de alta resolución
- Detección Remota: Mantiene la regulación en la carga sobre distancias hasta caída de 0,5V por cable
- Operación Maestro/Esclavo: Hasta cuatro unidades pueden conectarse para mayor potencia o voltaje
- Medidores de Panel Digital LED: Pantalla en tiempo real de voltaje y corriente con indicadores
- Diseño Montable en Bastidor: Topología de modo conmutado compacta para integración de sistemas
- Paso de Voltaje: 20mV, Paso de Corriente: 50mA
Aplicaciones
- Pruebas de banco y desarrollo de equipos
- Integración de sistemas y automatización
- Fuente de alimentación de laboratorio para I+D
- Pruebas y validación de productos
Especificaciones técnicas
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP60-150 | 20mV50mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP60-150 | 0-60V/0-150A |
Solicitar presupuesto
Farnell AP60-150 Fuente de Alimentación Autoajustable